• Sir_Premiumhengst@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    13 hours ago

    Skill Issue! (/s)

    Actual answer: Exists as Flatpak. Yes, with disclaimer that it’s no longer maintained and may be a security risk, but then again, the github hasn’t been updated sice 2021 either so…

    • SkyezOpen@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      11 hours ago

      Yeah I happened to notice it in bazaar while working on it. Currently struggling to get the dance mat working. The game controller menu freezes and crashes whenever it’s plugged in. Works totally fine on steam though, but I can’t make steam hijack the signals. Gonna try a hidraw driver I found later.

      • Sir_Premiumhengst@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        9 hours ago

        Darn, I don’t have a dance mat0 :/ Silly approach but output dancemat to keystrokes? I have made some silly combinations work with AntiMicroX (https://github.com/AntiMicroX/antimicrox?tab=readme-ov-file) installed as flatpak.

        Maybe helpful:

        Bazzite comes with joydev, analog, and xpad, so just a cursory search has me believe this should work more or less out of the box (https://askubuntu.com/questions/33676/how-to-configure-an-usb-ddr-dance-pad-for-stepmania) but I acknowledge I have no way to test this. You might have to modprobe each module or add them to /etc/modules-load.d/ddr-pad.conf …

        ¯_(ツ)_/¯

        Good luck!

        • SkyezOpen@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          3 hours ago

          I’m using a PSX mat with a PSX to USB adapter. I think that might be causing the problems. Stepmania detects it as 2 separate “Twin USB Joystick” but only the top buttons (start, select, X, O, and up arrow) respond in the input test. I did try adding it to steam and enabling steam controls, but that just adds 2 Xbox controllers to the existing list and stepmania still only sees input from the PSX ones. I did see it in input devices but I’m not experienced enough to know how to muck around with that.

          I think my best bet is to get a proper USB mat and hope that just works.