“They hold 50 pounds each. Four times 50 is 200 pounds, this thing can’t weigh more than that. It’ll be fine.”
Hanging shit on walls, and tying shit to the top of a car are two areas my dad passed on a healthy paranoia about to me. It takes me longer to tie a sheet of plywood to the roof rack than it does to drive home from the store. But, I’ve never once lost anything off the roof of my car, and I’ve never had anything come down from a wall like this.
Speaking of tying things to the roof of a car. I was moving my bed from one house to another but didn’t have a truck to move it. We strapped the bed to the top of our Nissan Versa and drove across town in the middle of the night at like 15 mph. Bed didnt budge.
Yeah, yeah. “Americans are, stupid they build houses out of wood and paper.”
Y’all stopped building houses out of wood centuries ago, after you cut down and burned all your forests. Also, houses built of wood are more common the world over than any other material. I ran Cat6 through my walls to every room in the house with a drill in the attic and a fishtape, I didn’t need to run conduit on the outside of the walls, or tear open the wall and cut grooves in the brick and concrete. It was easy to do. You don’t see beautiful “art” like this in bathrooms and kitchens in the U.S.:
Toggle bolts. Not the shitty “spring toggles” – actual toggle bolts like Hilti’s HTB-2, Cobra’s “FlipToggle”, or Toggler’s “SnapToggle”. They’re strong and don’t drop the toggle down the wall if you take the bolt out. Only downside is you have to drill a bigger hole, you need to have enough clearance for them to “flip”, and removing them is more of a chore.
I hate fastening anything to drywall. To me all the different flavors of anchors are just a good indicator that there’s no damn good way to do this. Whenever I can get away with it, I will misuse drywall hooks to hang rather than fasten things to drywall.
These are easy to install, leave only a pinhole in the wall and some are rated for 50lb loads.
💯 Those are my go to replacements. If it’s really heavy use toggle and probably try to find a stud to bare most of the weight.
But for everything else threaded anchors. Sure they leave a bigger hole, but you get a much bigger hole if something falls out. Better to secure it right once.
My dad passed a certain healthy paranoia on to me. But now he seems to have forgotten it all… Quick tug on a strap, wiggle the object a little, “yup, looks good!”
People always forget that tolerances like that are specific to certain situations, and that just because it has 50lb tolerance under one kind of load doesnt mean its going to have the same tolerance under a totally different set of stress. Or that 4 of them doesnt mean it can hold 200lbs with any certainty, unless the 200lbs is 4 independent 50lb things
I always secure the load in my truck bed even if there is zero chance of it getting free on regular roads. I’d rather it dodn’t shift around and definitely don’t want the wind to suck it up and possibly out on the highway.
Grew up doing farm work where a rut or other dip in a field could occasionally lauch things around when going too fast, including people chilling in the bed…
That’s always been my approach to tying/strapping things down, whether on a roof or trailer.
I’ve lost about 25% of all the tie down straps I’ve ever owned. They’re on the road, somewhere. But never a load.
Flex in materials is a bitch.
Now wall anchors are only for light stuff. You want some weight, then I’m doing lags into studs, even if that means I need to mount some wood across studs first.
“They hold 50 pounds each. Four times 50 is 200 pounds, this thing can’t weigh more than that. It’ll be fine.”
Hanging shit on walls, and tying shit to the top of a car are two areas my dad passed on a healthy paranoia about to me. It takes me longer to tie a sheet of plywood to the roof rack than it does to drive home from the store. But, I’ve never once lost anything off the roof of my car, and I’ve never had anything come down from a wall like this.
Speaking of tying things to the roof of a car. I was moving my bed from one house to another but didn’t have a truck to move it. We strapped the bed to the top of our Nissan Versa and drove across town in the middle of the night at like 15 mph. Bed didnt budge.
Good thing you didn’t have bed budge.
Well and people forget even if the toggle bolt can hold the weight, can the drywall be trusted to?
Almost forgot walls are made out of nothing in North America
Yeah, yeah. “Americans are, stupid they build houses out of wood and paper.”
Y’all stopped building houses out of wood centuries ago, after you cut down and burned all your forests. Also, houses built of wood are more common the world over than any other material. I ran Cat6 through my walls to every room in the house with a drill in the attic and a fishtape, I didn’t need to run conduit on the outside of the walls, or tear open the wall and cut grooves in the brick and concrete. It was easy to do. You don’t see beautiful “art” like this in bathrooms and kitchens in the U.S.:
Haha. You know, this is more true than false, because they are mostly void space.
I’d like to take a moment to say fuck the standard in the box plastic expansion drywall anchors
Every other type of drywall anchor is better and only for a few cents more. These always go in the trash.
I’m partial to snaptoggles myself
Toggle bolts. Not the shitty “spring toggles” – actual toggle bolts like Hilti’s HTB-2, Cobra’s “FlipToggle”, or Toggler’s “SnapToggle”. They’re strong and don’t drop the toggle down the wall if you take the bolt out. Only downside is you have to drill a bigger hole, you need to have enough clearance for them to “flip”, and removing them is more of a chore.
These things:
I hate fastening anything to drywall. To me all the different flavors of anchors are just a good indicator that there’s no damn good way to do this. Whenever I can get away with it, I will misuse drywall hooks to hang rather than fasten things to drywall.
These are easy to install, leave only a pinhole in the wall and some are rated for 50lb loads.
Everything reminds me of her…
EZ Anchors all the way
💯 Those are my go to replacements. If it’s really heavy use toggle and probably try to find a stud to bare most of the weight.
But for everything else threaded anchors. Sure they leave a bigger hole, but you get a much bigger hole if something falls out. Better to secure it right once.
You’re saying we need a bare stud to make the hole bigger.
Are you’re sure you’re not the wife? With all the hammering with studs and all.
I’m sorry I can’t help it.
I use these because you can take them out and reuse them, and the screw comes out and goes back in.
Toggle bolts are stronger, but you can’t take the screw all the way out without losing the back piece, that limits their utility somewhat.
My wife thinks these sucks. I cant convince her that these are not to be hammered into the drywall…
I love em
Wh… what? You drill them in… why the hell would you hammer them in???
Because you’re his wife silly.
That was my first thought, “who thought drywall would hold up a wall mounted rack?!” There’s a reason they put plywood in there
So it’s plywood screwed to stud and rack screwed to plywood?
That is what I usually see. But for network equipment. Not servers. Those should always be in floor racks
My dad passed a certain healthy paranoia on to me. But now he seems to have forgotten it all… Quick tug on a strap, wiggle the object a little, “yup, looks good!”
As long as you say “that’s not going anywhere”, it’ll definitely hold
You have to twang all the ropes while incanting.
People always forget that tolerances like that are specific to certain situations, and that just because it has 50lb tolerance under one kind of load doesnt mean its going to have the same tolerance under a totally different set of stress. Or that 4 of them doesnt mean it can hold 200lbs with any certainty, unless the 200lbs is 4 independent 50lb things
I always secure the load in my truck bed even if there is zero chance of it getting free on regular roads. I’d rather it dodn’t shift around and definitely don’t want the wind to suck it up and possibly out on the highway.
Grew up doing farm work where a rut or other dip in a field could occasionally lauch things around when going too fast, including people chilling in the bed…
Same but it was a golf cart with a lift kit and not the stock speed controller
If one will hold it, then 4 is good insurance.
That’s always been my approach to tying/strapping things down, whether on a roof or trailer.
I’ve lost about 25% of all the tie down straps I’ve ever owned. They’re on the road, somewhere. But never a load.
Flex in materials is a bitch.
Now wall anchors are only for light stuff. You want some weight, then I’m doing lags into studs, even if that means I need to mount some wood across studs first.
Lags into studs is how I mount my safes. Nothing else will do.